Katool KT-T810 Tire Changer & KT-B700 Wheel Balancer Combo
Designed for professional workshops, this combo pairs the KT-T810 tire changer with the KT-B700 wheel balancer to streamline tire service workflows. The KT-T810 accepts wheels up to 41 in diameter and 15 in width and uses alloy steel jaws with protective covers to minimize rim damage. Its 2.0 HP motor and pull-type pedal controls deliver consistent power and straightforward operation under heavy use. Integrated inflation gauge and a high-quality pneumatic filter simplify inflation and reduce moisture-related wear on pneumatic components. The KT-B700 balancer supports rims under 30 in, handles wheel widths from 3 to 12 in, and completes balance cycles in approximately 7 seconds at 180 rpm. Balancing accuracy to ±1 g and multiple balance modes accommodate a wide range of rim types and aftermarket wheels. Both units run on 120V single-phase power with robust copper-wound motors built for sustained shop duty. A closed-body design, solid welded steel construction and hardened components improve component longevity and reduce vibration during operation. Freight-only shipping and optional wheel guard or longer shaft configurations allow adaptation for commercial garages and heavy-duty shops. Comprehensive parts warranty terms are provided per unit and the package includes protective covers, basic mounting accessories and standard mounting hardware.
Features
KT-T810 Wheel Clamp Tire Changer Machine
- Alloy steel jaw, interface carburization treatment of 0.8-1.1mm deepness, whole quenching process, making the jaw inside more tenacity and outside more hard, and take the jaw cover for protect rim
- The mounting head is made by stainless, solution treatment and interface polishing, the shape conforms to the engineering principle, and take with plastic cover for protect rim
- Inflation gauge with pedal control
- With high quality spade cover, effective prevent damage rim
- Pull type pedal control system, convenience for changing and maintenance
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- With high quality filter, reliable drop oil, effective filter pressure air, and make more longer using life for pneumatic system
- For North America region used 120V/1ph/2.0HP motor, more strong power and high efficiency working
- Closed body for protect inside parts well
KT-B700 Wheel Balancer
- The body use 3mm thickness steel, high strength, solid welding, few vibration
- All-in-one pressure sensor support design, bottom board thickness 8mm, side board thickness 8mm, that insure the sensor working stable and high precision
- Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life
- The ?36mm shaft thread is by quenching treatment, high strength
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life
- Various balance mode, according different rim for different balance mode, make the balance effect more precision
- Built-in fault diagnosis and self calibration program that double side calibration, no memory parameters, operation more easy
- Unit selection(Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Wheel guard for optional
- Longer shaft for more width wheels
Specifications
KT-T810 Wheel Clamp Tire Changer Machine
|
Max Wheel Diameter :
|
41"/1040mm
|
|
Max Wheel Width :
|
15"/380mm
|
|
Outside Clamp:
|
12"-22" |
|
Inside Clamp :
|
14"-24" |
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
2.0HP/1.5KW
|
|
Rotation Speed :
|
6.8r/min |
|
Air Pressure :
|
0.8-1.0Mpa(116-145psi) |
|
Net weight :
|
186KG |
KT-B700 Wheel Balancer
|
Rim Diameter:
|
<30"
|
|
Wheel Width:
|
3"-12"
|
|
Wheel Diameter:
|
<880mm
|
|
Balancing Speed:
|
180rpm
|
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
0.25KW
|
|
Rim Center Hole Dia.:
|
<135mm
|
|
Wheel Weight:
|
<65KG
|
|
Balancing Accuracy:
|
1g
|
|
Measuring Time:
|
7S
|
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Original: $1,899.00
-65%$1,899.00
$664.65More Images
Katool KT-T810 Tire Changer & KT-B700 Wheel Balancer Combo
Designed for professional workshops, this combo pairs the KT-T810 tire changer with the KT-B700 wheel balancer to streamline tire service workflows. The KT-T810 accepts wheels up to 41 in diameter and 15 in width and uses alloy steel jaws with protective covers to minimize rim damage. Its 2.0 HP motor and pull-type pedal controls deliver consistent power and straightforward operation under heavy use. Integrated inflation gauge and a high-quality pneumatic filter simplify inflation and reduce moisture-related wear on pneumatic components. The KT-B700 balancer supports rims under 30 in, handles wheel widths from 3 to 12 in, and completes balance cycles in approximately 7 seconds at 180 rpm. Balancing accuracy to ±1 g and multiple balance modes accommodate a wide range of rim types and aftermarket wheels. Both units run on 120V single-phase power with robust copper-wound motors built for sustained shop duty. A closed-body design, solid welded steel construction and hardened components improve component longevity and reduce vibration during operation. Freight-only shipping and optional wheel guard or longer shaft configurations allow adaptation for commercial garages and heavy-duty shops. Comprehensive parts warranty terms are provided per unit and the package includes protective covers, basic mounting accessories and standard mounting hardware.
Features
KT-T810 Wheel Clamp Tire Changer Machine
- Alloy steel jaw, interface carburization treatment of 0.8-1.1mm deepness, whole quenching process, making the jaw inside more tenacity and outside more hard, and take the jaw cover for protect rim
- The mounting head is made by stainless, solution treatment and interface polishing, the shape conforms to the engineering principle, and take with plastic cover for protect rim
- Inflation gauge with pedal control
- With high quality spade cover, effective prevent damage rim
- Pull type pedal control system, convenience for changing and maintenance
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- With high quality filter, reliable drop oil, effective filter pressure air, and make more longer using life for pneumatic system
- For North America region used 120V/1ph/2.0HP motor, more strong power and high efficiency working
- Closed body for protect inside parts well
KT-B700 Wheel Balancer
- The body use 3mm thickness steel, high strength, solid welding, few vibration
- All-in-one pressure sensor support design, bottom board thickness 8mm, side board thickness 8mm, that insure the sensor working stable and high precision
- Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life
- The ?36mm shaft thread is by quenching treatment, high strength
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life
- Various balance mode, according different rim for different balance mode, make the balance effect more precision
- Built-in fault diagnosis and self calibration program that double side calibration, no memory parameters, operation more easy
- Unit selection(Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Wheel guard for optional
- Longer shaft for more width wheels
Specifications
KT-T810 Wheel Clamp Tire Changer Machine
|
Max Wheel Diameter :
|
41"/1040mm
|
|
Max Wheel Width :
|
15"/380mm
|
|
Outside Clamp:
|
12"-22" |
|
Inside Clamp :
|
14"-24" |
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
2.0HP/1.5KW
|
|
Rotation Speed :
|
6.8r/min |
|
Air Pressure :
|
0.8-1.0Mpa(116-145psi) |
|
Net weight :
|
186KG |
KT-B700 Wheel Balancer
|
Rim Diameter:
|
<30"
|
|
Wheel Width:
|
3"-12"
|
|
Wheel Diameter:
|
<880mm
|
|
Balancing Speed:
|
180rpm
|
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
0.25KW
|
|
Rim Center Hole Dia.:
|
<135mm
|
|
Wheel Weight:
|
<65KG
|
|
Balancing Accuracy:
|
1g
|
|
Measuring Time:
|
7S
|
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Designed for professional workshops, this combo pairs the KT-T810 tire changer with the KT-B700 wheel balancer to streamline tire service workflows. The KT-T810 accepts wheels up to 41 in diameter and 15 in width and uses alloy steel jaws with protective covers to minimize rim damage. Its 2.0 HP motor and pull-type pedal controls deliver consistent power and straightforward operation under heavy use. Integrated inflation gauge and a high-quality pneumatic filter simplify inflation and reduce moisture-related wear on pneumatic components. The KT-B700 balancer supports rims under 30 in, handles wheel widths from 3 to 12 in, and completes balance cycles in approximately 7 seconds at 180 rpm. Balancing accuracy to ±1 g and multiple balance modes accommodate a wide range of rim types and aftermarket wheels. Both units run on 120V single-phase power with robust copper-wound motors built for sustained shop duty. A closed-body design, solid welded steel construction and hardened components improve component longevity and reduce vibration during operation. Freight-only shipping and optional wheel guard or longer shaft configurations allow adaptation for commercial garages and heavy-duty shops. Comprehensive parts warranty terms are provided per unit and the package includes protective covers, basic mounting accessories and standard mounting hardware.
Features
KT-T810 Wheel Clamp Tire Changer Machine
- Alloy steel jaw, interface carburization treatment of 0.8-1.1mm deepness, whole quenching process, making the jaw inside more tenacity and outside more hard, and take the jaw cover for protect rim
- The mounting head is made by stainless, solution treatment and interface polishing, the shape conforms to the engineering principle, and take with plastic cover for protect rim
- Inflation gauge with pedal control
- With high quality spade cover, effective prevent damage rim
- Pull type pedal control system, convenience for changing and maintenance
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- With high quality filter, reliable drop oil, effective filter pressure air, and make more longer using life for pneumatic system
- For North America region used 120V/1ph/2.0HP motor, more strong power and high efficiency working
- Closed body for protect inside parts well
KT-B700 Wheel Balancer
- The body use 3mm thickness steel, high strength, solid welding, few vibration
- All-in-one pressure sensor support design, bottom board thickness 8mm, side board thickness 8mm, that insure the sensor working stable and high precision
- Top level motor and pure copper winding, more power, fast heat dissipation, low defect rate and longer using life
- The ?36mm shaft thread is by quenching treatment, high strength
- Top level motor and pure copper winding, fast heat dissipation, low defect rate and longer using life
- The computer board adopt advanced welding technology, moisture proof, dustproof and anti-static electricity, more longer life
- Various balance mode, according different rim for different balance mode, make the balance effect more precision
- Built-in fault diagnosis and self calibration program that double side calibration, no memory parameters, operation more easy
- Unit selection(Ounce/Gram, MM/Inch)
- High quality integration power board, working stable and reliable
- Wheel guard for optional
- Longer shaft for more width wheels
Specifications
KT-T810 Wheel Clamp Tire Changer Machine
|
Max Wheel Diameter :
|
41"/1040mm
|
|
Max Wheel Width :
|
15"/380mm
|
|
Outside Clamp:
|
12"-22" |
|
Inside Clamp :
|
14"-24" |
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
2.0HP/1.5KW
|
|
Rotation Speed :
|
6.8r/min |
|
Air Pressure :
|
0.8-1.0Mpa(116-145psi) |
|
Net weight :
|
186KG |
KT-B700 Wheel Balancer
|
Rim Diameter:
|
<30"
|
|
Wheel Width:
|
3"-12"
|
|
Wheel Diameter:
|
<880mm
|
|
Balancing Speed:
|
180rpm
|
|
Power Supply:
|
120V 1PH
|
|
Motor Power:
|
0.25KW
|
|
Rim Center Hole Dia.:
|
<135mm
|
|
Wheel Weight:
|
<65KG
|
|
Balancing Accuracy:
|
1g
|
|
Measuring Time:
|
7S
|
Warranty
Katool offers a limited one-year (12 months) warranty on all parts and against all product defects, free of charge.
A 2-year extended warranty plan is available for any Katool or M&E automotive equipment.
Warranty Includes:
- Cylinders, power units, motors, displays, electronics, etc.
- Vehicle lifts include an additional three-year (36 months) warranty on structural components only.
Warranty Conditions:
- Claims must fall within the warranty period.
- Warranty is non-transferable and requires the original order number and purchase from our company or a registered vendor.
- Replacement parts will be provided at no cost, including free shipping.
Note:
- All warranty claims are subject to approval by the warranty/service department.
- Photos and/or videos of defects may be requested.
- Do not disassemble any equipment before the issue is determined.
- Equipment outside the warranty policy will not be covered, and the buyer will be responsible for replacement parts and shipping costs.
- Labor is not included in the warranty.
